Warmbac 40m Rope Bag

The Warmbac 40m Rope Bag has a small pocket which is ideal for basic storage, this is then secured with a Velcro closure strip. The bags are fitted with shoulder straps so they are easy to carry, there is then a small grab handle located between the shoulder straps for general lifting. Internally there are two pie in points for your caving rope. If you are doing some vertical rope work (SRT) there is also a hauling loop that comes fitted with a 50mm stainless d ring.

Features:
Manufactured from heavy duty PVC, with cordura internal closure flap.
Inside pocket with velcro closure.
44mm webbing shoulder straps.
Metal buckles are used to attach the lower straps.
25mm replaceable lower straps with a 12cm PVC protection sleeves at the base.
An internal rope attachment loop is also stitched to the straps.
Handle/hauling loop is stitched from a single strip of 50mm webbing for extra strength.
The handle has a 25mm webbing insert.
The hauling loop has a 50mm stainless D ring. The rear hauling loop is 25mm webbing.
Top of side seam is reinforced with webbing which also forms an internal loop.
The base has a 25mm webbing drag handle and 3x15mm eyeleted drain holes.
For extra protection, the lower part of the bag is double thickness pvc. To further protect the bottom of the bag, Warmbac stitch 25mm webbing around the base Packing the bag is made easier, by making the circumference at the top is larger than at the bottom.

Specifications:
Height: 46cm
Base diameter: 21cm
Diameter the top: 24cm
Pocket: 20x20cm